Conditions of use and performance The power required by the tine varies between 35-45 HP (28-33 kW) for 30 cm working depth, up to 55-65 HP (45-48 kW) for 70 cm. Working speeds should be maintained between 3.0 and 5.0 km/h, achieving a yield of 0.65 to 0.85 on the plot.
What is the function of the subsoiler? Function main • Soil cracking breaking the compacted layers without inverting the profile. They must work at least 10 cm below the layer to be broken. The soil is broken in a V from the bottom of the furrow to the surface.
What to consider when choosing a subsoiler? When buying a subsoiler I know must consider the complexity and power required for finish the job. In the same way, the ground where it will be used must be evaluated. Knowing this, if you are interested in knowing the price subsoilersget in touch with us and we will help you choose the most suitable one.
How big is a subsoiler? Their working widths vary from 120cm to 320cm and can be adjusted to get the right working width for your tractor and working area. The working depth of subsoilers It can be 70cm to 85cm.
What are the types of subsoilers?
We can divide them into two groups:
- Powered. Alternative arm moved by a system of shafts and gate driven by an oscillatory movement caused by connecting rods.
- Not powered. By rubber blocks, fixed with a tree-shaped bolt.
Contents
How many resumes does a subsoiler need? – Related issues
When to pass the subsoiler?
This is best done immediately after harvesting, either maize or after crops such as wheat or rape (in summer), when soils have low moisture content.
How many HP per plow disc?
Plow of discs It consists of 3 to 4 discs 24″ or 26″ X 1/4” thick disk, with a working depth of disk from 15 to 25 cm. Power requirement for equipment from 80 to 100 hp engine.
How long does it take to plow one hectare?
Barely a quarter of an hour was enough for the tractor complete the work of hectare (more precisely 14 minutes) thanks to an average working speed of 9.3 km/h.
What are the parts of a plow?
It is composed of the following elements rooms: mencera, belorto, corner, earmuffs, telera, bed or dental, grille, rudder and cabija.
What are the disadvantages of the plow?
These are the main plow disadvantages:
- Damage to the existing microflora in the soil is caused. …
- Creation of the plowing crust. …
- Increased number of tillage steps. …
- Greater energy and economic consumption.
What is the Subsolar Earth?
Remove the Usually I below the topsoil, or plow deep enough without turning the soil.
What is basement work?
The works of plowing The most common primaries in many parts of Mexico are subsoil and fallow. Subsoiling is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. it’s done with a plow basement or subsoil plough.
What is Paratile?
Vertical tillage equipment for loosening deep layers.
How much HP is needed per Chisel Spike?
Power Requirements Requires power between 15 and 20 HP per chisel.
How much HP does a scissor need?
Consumption unit 7 to 10 resume.
How much HP does a seeder need?
Requires 160/180 power hp.
How to improve compacted soil?
A totally biological method to improve the structure of a Usually I and increase its porosity by growing plants that cover a large area at a reduced cost. When they grow, their roots dig galleries which remain intact (if they are not plowed) until the next harvest.
How to improve soil aeration?
Wetting agents improve infiltration and water reaches deeper levels of the Usually I. They also allow microorganisms to burrow deeper. By digging, they improve the soil aeration and allow water to infiltrate lower, which promotes root development.
What is fallow and what is it used for?
It is a technique used in rotation of crops, for replenish the nutrients and chemical composition of the soil before of another time of to harvest, for this balance can be restored naturally of the elements that make up the earth.
What type of plow is best?
The plow The disc type is also useful for tillage, but unlike the mouldboard, the disc type is better in hard and rocky soils or soils with large remains of roots, because it works according to its weight.
How to calculate the CV of a tractor?
According to the definition as a physical quantity, The power traction that develops in the traction of a tractor (PT) is equal to the product of the force it develops by the speed at which the tractor (PT = FT · V).
How much does an 18-disc harrow weigh?
Disc spacing
| total cutting width | 2.11 m (6.9 ft) | 3.20 m (10.5 ft) |
| weight of dispatch | 1,362.4 kg (3,003.6 lb) | 1,832.8 kg (4,040.6 lbs) |
| lester for disk | 75.7 kg (166.9 lbs) | 65.5 kg (144.4 lbs) |
| hp at PTO – recommended | 40 to 70 hp | 65 to 100 hp |
1 more row
How much does an hour of work with a tractor cost?
For tractor of 122 HP (90 kW), operating with an average load throughout the year, this consumption would be 13.5 L/h, which What equivalent to €10.13/h (€0.75/litre of diesel), and maintenance and repairs at €3.65/h, which What in total it reaches €13.77/h.
How many hectares can a tractor work?
Professor-researcher in the Department of Mechanical Engineering at UACH. of these artefacts, which ensure that the adequate power/area ratio is 1 hp ha–1, these tractors It has a potential coverage for agricultural work of about 80 ha.
How many hours is normal on a tractor?
If you know the consumption of your tractor, you can multiply them by an average price of diesel to obtain this parameter. If you don’t know them, an average reference value that you can use it is 0.1 L/CVh. For example, a tractor of 155 CV, consumption would be 15.5 L/hour.
When to pass the subsoiler?
This is best done immediately after harvesting, either maize or after crops such as wheat or rape (in summer), when soils have low moisture content.
What is the Subsolar Earth?
Remove the Usually I below the topsoil, or plow deep enough without turning the soil.
What is the agricultural subsoil?
The basement This is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. This is done with the basement plow or subsoiler plow. Apply fertilizers, insecticides, etc.
What is the function of disc plow?
The disk It is connected by four or five screws, which allows replacement in case of breakage or wear. about each disk a cleaner, or scraper, is placed, which is responsible for loosening the strip of earth that rises through the disk.