The plow It is a widely used agricultural tool in various soil conditions.
- The plow it is probably the oldest tool or tool used in agriculture, also providing a long useful life for the farmer. …
- three differ types: mouldboard, disc and rotary.
When should the subsoiler be used? Main function • Soil cracking breaking up the compacted layers without I know produce a profile inversion. should work at least 10 cm below the layer that I know intends to break the ground I know breaks in a V from the bottom of the groove to the surface.
What is a subsoiler and what is it used for? The plough of underground or subsoileris a suitable plow for subsolar, i.e. working in deeper soils What should be removed due to: need of break down layers reinforced by traffic. for increase in soil fertility and moisture.
What to consider when choosing a subsoiler? When buying a subsoiler I know must consider the complexity and power required for finish the job. In the same way, the ground where it will be used must be assessed. Knowing this, if you are interested in knowing the price subsoilersget in touch with us and we will help you choose the most suitable one.
How big is a subsoiler? Their working widths vary from 120cm to 320cm and can be adjusted to get the right working width for your tractor and working area. The working depth of subsoilers It can be 70cm to 85cm.
How many resumes does a subsoiler need? Conditions of use and performance The power required by the tine varies between 35-45 HP (28-33 kW) for 30 cm working depth, up to 55-65 HP (45-48 kW) for 70 cm. Working speeds should be maintained between 3.0 and 5.0 km/h, achieving a yield of 0.65 to 0.85 on the plot.
- What are the types of plows? – Related issues
- What are the disadvantages of the plow?
- What are the types of subsoilers?
- What is the function of the basement?
- How long does it take to plow one hectare?
- How many HP per plow disc?
- What is the difference between plow and harrow?
- What is vertical tillage?
- What is zero tillage?
- How many HP are needed for each plantation body?
- How much HP is needed per Chisel Spike?
- How much HP does a scissor need?
- What type of plow is best?
- Why is the land plowed?
- How to improve soil quality?
- What is Paratile?
- What is basement work?
- How deep is the basement?
- What’s underground?
- How many layers does the basement have?
- How much does an hour of work with a tractor cost?
- How many hectares can a tractor work?
- How many hours is normal on a tractor?
- What is the Subsolar in agriculture?
- What is the agricultural subsoil?
- What is the function of disc plow?
- What is fallow in agriculture?
What are the types of plows? – Related issues
What are the disadvantages of the plow?
These are the main plow disadvantages:
- Damage to the existing microflora in the soil is caused. …
- Creation of the plowing crust. …
- Increased number of tillage steps. …
- Greater energy and economic consumption.
What are the types of subsoilers?
We can divide them into two groups:
- Powered. Alternative arm moved by a system of shafts and gate driven by an oscillatory movement caused by connecting rods.
- Not powered. By rubber blocks, fixed with a tree-shaped bolt.
What is the function of the basement?
the work of basement It consists of breaking the earth, breaking it more or less, deep under the currents, in order to increase the infiltration and penetration of air and roots.
How long does it take to plow one hectare?
Barely a quarter of an hour was enough for the tractor complete the work of hectare (more precisely 14 minutes) thanks to an average working speed of 9.3 km/h.
How many HP per plow disc?
Plow of discs It consists of 3 to 4 discs 24″ or 26″ X 1/4” thick disk, with a working depth of disk from 15 to 25 cm. Power requirement for equipment from 80 to 100 hp engine.
What is the difference between plow and harrow?
The flirt It is an agricultural instrument that consists of a kind of grid with spikes at the bottom that serves to level the land after plowing. harrow. The plow It is a tillage tool used in agriculture to open furrows and remove soil before sowing seeds.
What is vertical tillage?
The vertical plowing it is a system of guiding principles that maximizes yield by increasing water infiltration, root development and nutrient uptake.
What is zero tillage?
It is understood by zero tillage, the planting that is done directly on the ground, without the need to remove it or eliminate the thatch that covers it. The important thing is to remove the weeds. Weed removal can be done before planting or after crop emergence.
How many HP are needed for each plantation body?
For greater work efficiency, I know requires tractors with powers between 120 and 160 hpfor planters up to 7 meters, and from 180 to 220 hpfor versions up to 14 meters.
How much HP is needed per Chisel Spike?
Power Requirements Requires power between 15 and 20 HP per chisel.
How much HP does a scissor need?
Consumption unit 7 to 10 resume.
What type of plow is best?
The plow The disc type is also useful for tillage, but unlike the mouldboard, the disc type is better in hard and rocky soils or soils with large remains of roots, because it works according to its weight.
Why is the land plowed?
Plow increases porosity, which promotes growth of plants, although water is lost when the soil is disturbed for evaporation and something of Usually I for erosion and possible rain wash away the nutrients and fertilizers that may have been applied to the soil, generating losses.
How to improve soil quality?
Manure and compost are needed to to improve the structuring of Usually I (chemical fertilizers are needed for higher production). The common method is to dig a hole to produce and mix the compost, organic matter, manure and use them in the Usually Ijust before planting crops.
What is Paratile?
Vertical tillage equipment for loosening deep layers.
What is basement work?
The works of plowing The most common primaries in many parts of Mexico are subsoil and fallow. Subsoiling is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. it’s done with a plow basement or subsoil plough.
How deep is the basement?
Deep soils have a meter or more to reach a boundary layer. Moderate depths are less than one meter but greater than 0.60 m. The shallow soils measure less than one meter but more than 0.60 m. Shallow soils are less than 0.25 m.
underground there is the substrate, which can be rock, sedimentary or aeolian deposits, largely affected by the active factors of soil formation in the basement.
How many layers does the basement have?
Layer the top contains water, air and topsoil. Mulch is made up of the remains of dead plants and animals, mineral particles and sand. The layer middle has rocks, sand, clay and less water than the upper. The layer the bottom is made up of rocks.
How much does an hour of work with a tractor cost?
For tractor of 122 HP (90 kW), operating with an average load throughout the year, this consumption would be 13.5 L/h, which What equivalent to €10.13/h (€0.75/litre of diesel), and maintenance and repairs at €3.65/h, which What in total it reaches €13.77/h.
How many hectares can a tractor work?
Professor-researcher in the Department of Mechanical Engineering at UACH. of these artefacts, which ensure that the adequate power/area ratio is 1 hp ha–1, these tractors It has a potential coverage for agricultural work of about 80 ha.
How many hours is normal on a tractor?
If you know the consumption of your tractor, you can multiply them by an average price of diesel to obtain this parameter. If you don’t know them, an average reference value that you can use it is 0.1 L/CVh. For example, a tractor of 155 CV, consumption would be 15.5 L/hour.
What is the Subsolar in agriculture?
Remove the soil below the topsoil or till deep enough without turning the soil. It consists: With a bulldozer or with a tractor (with a lot of power) three rejones are passed (a part of the tractor) What They cut the plot back and forth.
What is the agricultural subsoil?
The basement This is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. This is done with the basement plow or subsoiler plow. Apply fertilizers, insecticides, etc.
What is the function of disc plow?
The disk It is connected by four or five screws, which allows replacement in case of breakage or wear. about each disk a cleaner, or scraper, is placed, which is responsible for loosening the strip of earth that rises through the disk.
What is fallow in agriculture?
This concept assumes rest between sowing and cultivation, an agricultural process to allow the qualities of the soil not to wear out. The rest periods are usually every two or three years, in this way the soil recovers its nutrients and in the next planting it will bear the best fruits.