The DOLBI subsoiler PARATILLA, is a team born from the experiences of DOROU (FRANCE) and TYE (USA). DOLBI develops in Argentina, this vertical tillage tool for deep loosening in direct seeding plots, pastures and degraded fields.
When should the subsoiler be used? Main function • Soil cracking breaking up the compacted layers without I know produce a profile inversion. should work at least 10 cm below the layer that I know intends to break the ground I know breaks in a V from the bottom of the groove to the surface.
What to consider when choosing a subsoiler? When buying a subsoiler I know must consider the complexity and power required for finish the job. In the same way, the ground where it will be used must be assessed. Knowing this, if you are interested in knowing the price subsoilersget in touch with us and we will help you choose the most suitable one.
What is a subsoiler and what is it used for? The plough of underground or subsoileris a suitable plow for subsolar, i.e. working in deeper soils What should be removed due to: need of break down layers reinforced by traffic. for increase in soil fertility and moisture.
How big is a subsoiler? Their working widths vary from 120cm to 320cm and can be adjusted to get the right working width for your tractor and working area. The working depth of subsoilers It can be 70cm to 85cm.
How many resumes does a subsoiler need? Conditions of use and performance The power required by the tine varies between 35-45 HP (28-33 kW) for 30 cm working depth, up to 55-65 HP (45-48 kW) for 70 cm. Working speeds should be maintained between 3.0 and 5.0 km/h, achieving a yield of 0.65 to 0.85 on the plot.
Contents
What is Paratile? – Related issues
How much HP per Paratil Spike?
Answering and interpreting that you will be working at a depth of 30cm, the width between the tines would be 45cm, that means about 1.5 times the distance between the tines. And to work at this depth you need 20-25 hp per tooth…if they are at least the commonly sold ones.
What are the types of subsoilers?
We can divide them into two groups:
- Powered. Alternative arm moved by a system of shafts and gate driven by an oscillatory movement caused by connecting rods.
- Not powered. By rubber blocks, fixed with a tree-shaped bolt.
How long does it take to plow one hectare?
Barely a quarter of an hour was enough for the tractor complete the work of hectare (more precisely 14 minutes) thanks to an average working speed of 9.3 km/h.
What type of plow is best?
The plow The disc type is also useful for tillage, but unlike the mouldboard, the disc type is better in hard and rocky soils or soils with large remains of roots, because it works according to its weight.
What is basement work?
The works of plowing The most common primaries in many parts of Mexico are subsoil and fallow. Subsoiling is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. it’s done with a plow basement or subsoil plough.
What are the disadvantages of the plow?
These are the main plow disadvantages:
- Damage to the existing microflora in the soil is caused. …
- Creation of the plowing crust. …
- Increased number of tillage steps. …
- Greater energy and economic consumption.
What is the function of the basement?
the work of basement It consists of breaking the earth, breaking it more or less, deep under the currents, in order to increase the infiltration and penetration of air and roots.
What is vertical tillage?
The vertical plowing it is a system of guiding principles that maximizes yield by increasing water infiltration, root development and nutrient uptake.
What are the types of plows?
The plow It is a widely used agricultural tool in various soil conditions.
- The plow it is probably the oldest tool or tool used in agriculture, also providing a long useful life for the farmer. …
- three differ types: mouldboard, disc and rotary.
More articles…
What is plow layer?
plow foot: It is a state acquired by the ground which results from the bad management of the works of work of the ground carried out by the man.
How many HP are needed for each plantation body?
For greater work efficiency, I know requires tractors with powers between 120 and 160 hpfor planters up to 7 meters, and from 180 to 220 hpfor versions up to 14 meters.
How much does an hour of work with a tractor cost?
For tractor of 122 HP (90 kW), operating with an average load throughout the year, this consumption would be 13.5 L/h, which What equivalent to €10.13/h (€0.75/litre of diesel), and maintenance and repairs at €3.65/h, which What in total it reaches €13.77/h.
How many hectares can a tractor work?
Professor-researcher in the Department of Mechanical Engineering at UACH. of these artefacts, which ensure that the adequate power/area ratio is 1 hp ha–1, these tractors It has a potential coverage for agricultural work of about 80 ha.
How many hours is normal on a tractor?
If you know the consumption of your tractor, you can multiply them by an average price of diesel to obtain this parameter. If you don’t know them, an average reference value that you can use it is 0.1 L/CVh. For example, a tractor of 155 CV, consumption would be 15.5 L/hour.
How does plowing affect the soil?
The tillage of Usually I with traditional tools (plow disc or moldboard), is an agricultural practice that research shows as a possible cause of erosion, compaction, moisture loss and increased production costs when used excessively.
What are the results of good tillage?
Improved aeration and oxygenation Even though we have already mentioned it in other articles, turning the soil increases the number of macropores in the soil. These are responsible for storing gases, (What oxygen), which the roots of the plants need so that the problems do not appear.
How deep does a plow go?
The depth of intervention plow It should be between 60 and 80% of the cutting width of the coulter. This width is measured perpendicular to the direction of advance.
What is the Subsolar in agriculture?
Remove the soil below the topsoil or till deep enough without turning the soil. It consists: With a bulldozer or with a tractor (with a lot of power) three rejones are passed (a part of the tractor) What They cut the plot back and forth.
What are the disadvantages of the plow?
These are the main plow disadvantages:
- Damage to the existing microflora in the soil is caused. …
- Creation of the plowing crust. …
- Increased number of tillage steps. …
- Greater energy and economic consumption.
What is the agricultural subsoil?
The basement This is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. This is done with the basement plow or subsoiler plow. Apply fertilizers, insecticides, etc.
What is the function of disc plow?
The disk It is connected by four or five screws, which allows replacement in case of breakage or wear. about each disk a cleaner, or scraper, is placed, which is responsible for loosening the strip of earth that rises through the disk.