The tractors and the harvesters consumed an average of 316 g kW/h, while for the transport of cut stalks the consumption was 2551 g/km, this value relates to the Torton type trucks, since they represent 92% of the fleet of units in this region although mostly obsolete.
How big is a subsoiler? Their working widths vary from 120cm to 320cm and can be adjusted to get the right working width for your tractor and working area. The working depth of subsoilers It can be 70cm to 85cm.
What to consider when choosing a subsoiler? When buying a subsoiler I know must consider the complexity and power required for finish the job. In the same way, the ground where it will be used must be assessed. Knowing this, if you are interested in knowing the price subsoilersget in touch with us and we will help you choose the most suitable one.
When is the subsoiler used? Main function • Soil cracking breaking up the compacted layers without I know produce a profile inversion. They must work at least 10 cm below the layer that I know intends to break up
What is a subsoiler and what is it used for? The plough of underground or subsoileris a suitable plow for subsolar, i.e. working in deeper soils What should be removed due to: need of break down layers reinforced by traffic. for increase in soil fertility and moisture.
How many resumes does a subsoiler need? The power required by the tine varies between 35-45 CV (28-33 kW) for a working depth of 30 cm, up to 55-65 CV (45-48 kW) for 70 cm. Working speeds should be maintained between 3.0 and 5.0 km/h, achieving a yield of 0.65 to 0.85 on the plot.
Contents
How much does a tractor spend per hectare? – Related issues
What are the disadvantages of the plow?
These are the main plow disadvantages:
- Damage to the existing microflora in the soil is caused. …
- Creation of the plowing crust. …
- Increased number of tillage steps. …
- Greater energy and economic consumption.
What are the types of subsoilers?
We can divide them into two groups:
- Powered. Alternative arm moved by a system of shafts and gate driven by an oscillatory movement caused by connecting rods.
- Not powered. By rubber blocks, fixed with a tree-shaped bolt.
How long does it take to plow one hectare?
Barely a quarter of an hour was enough for the tractor complete the work of hectare (more precisely 14 minutes) thanks to an average working speed of 9.3 km/h.
How many HP per plow disc?
Plow of discs It consists of 3 to 4 discs 24″ or 26″ X 1/4” thick disk, with a working depth of disk from 15 to 25 cm. Power requirement for equipment from 80 to 100 hp engine.
What is Ragging?
shredding: Since its function is to loosen and level the soil, it should be applied in a direction at 45 degrees to the line of tillage; This prevents the wheels of the tractor from falling simultaneously into the furrows being traveled, which causes sudden movements that affect the comfort of the operator and…
What is basement work?
The works of plowing The most common primaries in many parts of Mexico are subsoil and fallow. Subsoiling is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. it’s done with a plow basement or subsoil plough.
What are the types of plows?
The plow It is a widely used agricultural tool in various soil conditions.
- The plow it is probably the oldest tool or tool used in agriculture, also providing a long useful life for the farmer. …
- three differ types: mouldboard, disc and rotary.
How to calculate the CV of a tractor?
According to the definition as a physical quantity, The power traction that develops in the traction of a tractor (PT) is equal to the product of the force it develops by the speed at which the tractor (PT = FT · V).
How much HP does a portcullis need?
pulverizer
Series 60 60Kg. per disk – Separation between discs 245mm. Discs Square shafts 24″ – 1 1/8″ – Friction shoe block | ||
H6016 | 16 | 50-65 |
H6018 | 18 | 60-75 |
H6020 | twenty | 70-85 |
22 more rows
How do you measure the strength of a tractor?
The Powerful of an engine or the tractor is measured using a special instrument called a dynamometer, with which I know evaluates speed (rpm operating speed) and force or torque.
What type of plow is best?
The plow The disc type is also useful for tillage, but unlike the mouldboard, the disc type is better in hard and rocky soils or soils with large remains of roots, because it works according to its weight.
What are the consequences of tilling the soil?
“The plow increases erosion, mineralization and CO2 emissions into the atmosphere,” he explained, and defended a radical change in farming methods, as is already done in the United States.
How to improve soil quality?
Manure and compost are needed to to improve the structuring of Usually I (chemical fertilizers are needed for higher production). The common method is to dig a hole to produce and mix the compost, organic matter, manure and use them in the Usually Ijust before planting crops.
How much does an hour of work with a tractor cost?
For tractor of 122 HP (90 kW), operating with an average load throughout the year, this consumption would be 13.5 L/h, which What equivalent to €10.13/h (€0.75/litre of diesel), and maintenance and repairs at €3.65/h, which What in total it reaches €13.77/h.
How many hectares can a tractor work?
Professor-researcher in the Department of Mechanical Engineering at UACH. of these artefacts, which ensure that the adequate power/area ratio is 1 hp ha–1, these tractors It has a potential coverage for agricultural work of about 80 ha.
How many HP are needed per planting line?
For greater work efficiency, I know requires tractors with powers between 120 and 160 hpfor planters up to 7 meters, and from 180 to 220 hpfor versions up to 14 meters.
How much does an 18-disc harrow weigh?
Disc spacing
total cutting width | 2.11 m (6.9 ft) | 3.20 m (10.5 ft) |
weight of dispatch | 1,362.4 kg (3,003.6 lb) | 1,832.8 kg (4,040.6 lbs) |
lester for disk | 75.7 kg (166.9 lbs) | 65.5 kg (144.4 lbs) |
hp at PTO – recommended | 40 to 70 hp | 65 to 100 hp |
1 more row
How many discs does a harrow take?
Drag 660 dimensions
spacing between discs | 230mm (9 inches) | |
total cutting width | 1.9m (6.2ft) | 2.3m (7.5ft) |
shipping weight | 609.5 kg (1343.7 lb) | 683.6 kg (1,507.1 lb) |
weight per disk | 38.1 kg (84.0 lbs) | 34.2 kg (75.4 lbs) |
1 more row
What is the agricultural subsoil?
The basement This is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. This is done with the basement plow or subsoiler plow. Apply fertilizers, insecticides, etc.
What is plow layer?
The plow footmeanwhile, corresponds to a hard layer located at the plowing depth (25 to 35 cm), which is produced by the recurrent passage of plows investments (those that turn the ground) such as plows disc or moldboard.
What is a furrower?
The furrower It is the specific tool for creating furrows in previously worked land, as well as for creating small irrigation canals, small drainage ditches and for supporting row crops.
What is fallow in agriculture?
This concept assumes rest between sowing and cultivation, an agricultural process to allow the qualities of the soil not to wear out. The rest periods are usually every two or three years, in this way the soil recovers its nutrients and in the next planting it will bear the best fruits.