subsoiler
- subsoiler. …
- Hooking system. …
- Wheel. …
- Chassis or sash. …
- arms or legs…
- Scissors or bars.
What function does the subsoiler perform? Function main • Soil cracking breaking the compacted layers without inverting the profile. They must work at least 10 cm below the layer to be broken. The soil is broken in a V from the bottom of the furrow to the surface.
How big is a subsoiler? Their working widths vary from 120cm to 320cm and can be adjusted to get the right working width for your tractor and working area. The working depth of subsoilers It can be 70cm to 85cm.
When to use a subsoiler? The plough subsoiler I also know uses in the construction of drainage tunnels in clay soils with problems of water accumulation in the soil profile. To do this, a mole-like ball attached by a chain is installed on the back of the shoe to achieve the effect of forming drainage tunnels.
What are the types of subsoilers?
We can divide them into two groups:
- Powered. Alternative arm moved by a system of shafts and gate driven by an oscillatory movement caused by connecting rods.
- Not powered. By rubber blocks, fixed with a tree-shaped bolt.
How many resumes does a subsoiler need? Conditions of use and performance The power required by the tine varies between 35-45 HP (28-33 kW) for 30 cm working depth, up to 55-65 HP (45-48 kW) for 70 cm. Working speeds should be maintained between 3.0 and 5.0 km/h, achieving a yield of 0.65 to 0.85 on the plot.
Contents
What are the parts of a subsoiler? – Related issues
What are the disadvantages of the plow?
These are the main plow disadvantages:
- Damage to the existing microflora in the soil is caused. …
- Creation of the plowing crust. …
- Increased number of tillage steps. …
- Greater energy and economic consumption.
What are the types of plows?
The plow It is a widely used agricultural tool in various soil conditions.
- The plow it is probably the oldest tool or tool used in agriculture, also providing a long useful life for the farmer. …
- three differ types: mouldboard, disc and rotary.
How is subsoiling done?
The basement or scarified This technique consists of passing a machine over the ground subsoiler 5-point scarifier; work at a depth of 35-40 cm, in addition to covering a width of 1.5-2.0 meters (working width of the equipment).
What is Subsolar Soil?
Remove the Usually I below the topsoil, or plow deep enough without turning the soil.
What is Ragging?
shredding: Since its function is to loosen and level the soil, it should be applied in a direction at 45 degrees to the line of tillage; This prevents the wheels of the tractor from falling simultaneously into the furrows being traveled, which causes sudden movements that affect the comfort of the operator and…
What is basement work?
The works of plowing The most common primaries in many parts of Mexico are subsoil and fallow. Subsoiling is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. it’s done with a plow basement or subsoil plough.
How many HP per plow disc?
Plow of discs It consists of 3 to 4 discs 24″ or 26″ X 1/4” thick disk, with a working depth of disk from 15 to 25 cm. Power requirement for equipment from 80 to 100 hp engine.
How much HP does a portcullis need?
Consumption unit 36 86 resume.
How much HP does a scissor need?
Consumption unit 7 to 10 resume.
What type of plow is best?
The plow The disc type is also useful for tillage, but unlike the mouldboard, the disc type is better in hard and rocky soils or soils with large remains of roots, because it works according to its weight.
What are the results of good tillage?
Improved aeration and oxygenation Even though we have already mentioned it in other articles, turning the soil increases the number of macropores in the soil. These are responsible for storing gases, (What oxygen), which the roots of the plants need so that the problems do not appear.
What are the consequences of tilling the soil?
“The plow increases erosion, mineralization and CO2 emissions into the atmosphere,” he explained, and defended a radical change in farming methods, as is already done in the United States.
How long does it take to plow one hectare?
working speed I know is between 4 and 9 km/h, with which the pictured plow can plow about one hectare per hour. The force required depends on soil texture, soil moisture, working depth and speed.
How long does it take a tractor to plow one hectare?
Barely a quarter of an hour was enough for the tractor complete the work of hectare (more precisely 14 minutes) thanks to an average working speed of 9.3 km/h.
How does plowing affect the soil?
The tillage of Usually I with traditional tools (plow disc or moldboard), is an agricultural practice that research shows as a possible cause of erosion, compaction, moisture loss and increased production costs when used excessively.
What is plow layer?
plow foot: It is a state acquired by the ground which results from the bad management of the works of work of the ground carried out by the man.
What are the parts of the subsoiler?
subsoiler
- subsoiler. …
- Hooking system. …
- Wheel. …
- Chassis or sash. …
- arms or legs…
- Scissors or bars.
What is the Subsolar Earth?
Remove the Usually I below the topsoil, or plow deep enough without turning the soil.
What is basement work?
The works of plowing The most common primaries in many parts of Mexico are subsoil and fallow. Subsoiling is the operation that consists of breaking up the soil without turning it over or changing its position up to 80 cm deep. it’s done with a plow basement or subsoil plough.
What are the types of plows?
The plow It is a widely used agricultural tool in various soil conditions.
- The plow it is probably the oldest tool or tool used in agriculture, also providing a long useful life for the farmer. …
- three differ types: mouldboard, disc and rotary.