Some of the links in the post are affiliate links and I receive a commission for purchases made through some of the links in the post.
If you are planning to increase the aesthetic appeal of your home, you can try the Heart series.
This plant, scientifically known as: Ceropegia woodii, it is a unique hanging plant with succulent characteristics.
Works great for hanging baskets due to the long, downward-facing hanging branches with leaves that develop into large beaded shapes. Some are even more striking with their variegated leaves.
It is native to the southern part of Africa; hence the need to adapt the culture conditions.
It has other names such as heart necklace, heart necklace, heart chain, rosary vine, hearts on a chain, and heart vine.
Although this plant is fairly easy to grow, the leaves may turn yellow over time. Today we focus on what can cause this change and the quick fixes:
Contents
Why the Crown of Your Heart May Turn Yellow
Your heart suit may turn yellow for the following likely reasons; they are the wrong temperature or have too much water.
For a hanging plant, the last thing you want is for the plant to look sickly, which detracts from the plant’s appeal. hanging basket.
If your plant’s leaves are suddenly turning yellow, here are some likely causes:
Low temperatures
The heart variety is native to South Africa and therefore requires similar growing conditions. Ideally, conditions in your home or outside should be between 18 and 24°C.
This is easy to do in most homes. The plant can operate in temperatures slightly outside of this range.
However, the colder it is, the easier it is for the plant to turn yellow. The plant will generally do well in warmer conditions.
Temperatures must therefore be above 18-24°C before descending. The minimum temperature allowed is 16°C.
give too much water
Let’s start with this: the heart chain is a succulent. What does it mean? This means it has proper modifications to store water.
The plant prefers to be dry, so wait until the soil is dry before watering again.
When watering, be thorough, but don’t wet the soil. Instead, you need to silence him.
Keep in mind that too much water will strip nutrients from the soil, causing the plant to become iron deficient.
Also pay attention to the frequency of watering. The ideal is to water the plant every three weeks.
However, your weather conditions may cause the soil to dry out much sooner or later than this mark.
Therefore, always check the condition of the soil before adding water to it. In winter, the plant goes dormant and uses less water, which means less water is needed.
How to Record a Yellow Heart Sequence
Your plant has therefore turned yellow. Can you do something for this? Fortunately! Proceed as follows:
Temperature
Your plant is sensitive to temperature changes and will turn yellow if temperatures drop too low.
Check the temperature of the environment in which the plant is growing with a thermometer. If it drops below 16°C, move the plant to a warmer location or turn up the heat.
The advantage of hanging baskets is that you can move them according to your needs. If a week passes and no change is observed, consider other causes of yellowing.
Additionally, you may want to propagate healthy parts, as yellowing can also indicate that the plant has suffered significant damage.
give too much water
With yellowing, root damage is unlikely. But if you water the plant more than necessary, root damage may occur.
Water your heart too much it presents as yellow leaves, leaf drop and root rot. If you don’t address the change quickly, the plant may eventually die.
The backup method depends on the extent of the damage. In case of minor root damage, you can transplant the plant.
But with extensive root rot, you may need to propagate your plant, as we will see later.
replant
This process is quite simple.
First, you need to place your plant out of direct sunlight to give it time to recover.
A mistake people often make is assuming they need to have the plant outside to allow the soil to dry out.
Unfortunately, this only puts pressure on the already weakened plant, causing it to shrivel up and die.
Next, you need to carefully remove the plant from its original pot, making sure to start loosening the soil around the roots.
Do not pull on already weakened roots. Instead, work the soil from the top down to the root zone and remove the entire plant.
Now you can cut off the dead roots and vines, prune them and put them in a compost pile.
Don’t cut the white bulbs at the roots unless they look diseased. These help in the growth of new vines.
Now you can let the roots air dry out of direct sunlight. Do this for a few hours until the plant seems less saturated.
While you wait, pour the soil into the original pot and sanitize the container as desired.
If not disinfected, any microbial growth in the old soil will affect the newly propagated plant.
It is recommended to use a new soil mixture. Also check the pot to make sure there are enough drainage holes, which could be the reason for the waterlogging.
Add a few more holes to ensure good drainage before adding potting soil to ¾ of the level of the pot.
When the roots are dry, add them to the soil mixture and cover with soil, leaving an inch at the top.
Moisten the soil and leave the plant in a warm place out of direct sunlight.
Can you do this by spreading a healthier part?
As mentioned above, root damage can be so extensive that you may need to propagate the plant.
Which aims to grow a new plant from the vines and tubers of the old. Here’s how:
through the ground
The first method involves soil propagation.
Start by making an airy potting mix in a container. Next, cut healthy, knotted vines from the affected plant and place them in the ground, making sure the leaves are above ground.
Moisten the mixture and place the container out of direct sunlight. You should see growth after about 4 weeks and you can move the vine to another pot to mature.
Now you can take care of the plant as needed.
If you can’t find healthy vines, you can work with the smaller tubers. These appear as white pearls on the vines.
Cut off these tubers and place them in the ground, as you would vines.
Moisten the soil and wait about 4 weeks, after which the tubers should produce roots. You can now prune and plant the vines as above.
through the water
Although chalk line is a succulent, you can propagate it with water. Take healthy vines from the plant and remove the leaves.
Find a glass container and fill it with water before covering it with clear plastic. Tear a few holes in the plastic to attach the vines.
Place the container in indirect sunlight and allow the vines to root for 4 weeks. You can now move the roots to another pot and tend to them as needed.
You may be interested: How to Save Your Watered Hearts Set
Take care of your Cord of Hearts
We’ve already talked about taking care of your plant when you need it, but what does that mean?
Here’s how to prevent a row of hearts from turning yellow, as well as other common issues that can affect your plant:
Usually I
The soil should be moist but not wet and should have good drainage.
To increase the drainage capacity, you must have some small pebbles in the ground. For best results, you should work with a luscious mix.
light
Please note that lighting and sunlight are not the same thing. No matter how well your plant does in bright light, it won’t thrive in full sun.
Therefore, try to reduce sun exposure while ensuring your plant gets enough light. Outdoors, for example, your plant should be in light shade.
It sounds like a mystery, but it’s the ideal growth condition for your chain of hearts. For indoor cultivation, work with windows facing south and west.
Water
We’ve covered the frequency and amount of water your plant needs under causes of yellowing.
Keep in mind that your plant is succulent and watering should be minimal.
Temperature
Remember when we said the ideal temperature range was 18-24°C?
That’s all you need to know about the different growing conditions. Any temperature below 16°C can cause yellowing and even death of the plant.
Humidity
Humidity should be between 40-50%, comparable to the range in most indoor conditions. In some cases, you may need a humidifier to reach this range.
Fertilization
Your plant doesn’t need a lot of enrichment. If you can fertilize it once in the summer and again in the spring with a semi-strength fertilizer, you should be fine.
Avoid using fertilizers in the winter when the plant is dormant.
Common Heart Sequence Problems
hanging leaves
Yellowing followed by drooping leaves is a sign of overwatering. It is best to immediately reduce the frequency and amounts of watering.
curly leaves
Although this plant is a succulent, you may not be watering it. If the plant is not watered for a long time, water deposits in the tubers can dry out and cause the leaves to curl.
Aim to water your plant every 3 weeks for indoor conditions.
Mold
If you see a white substance on the surface of the floor, there may be mold. You can remedy this by moving the plant to a warmer location and checking the drainage of the soil.
Final Thoughts: Why is my chain of hearts turning yellow?
Yes, with a pair of hearts your best bet is to moderate between two mantras. You can use “less is more” in this case.
Use less water, less fertilizer, less sun exposure and your plant will be fine. But when it comes to drainage and temperature, go big or go home! Happy gardening!
Before you go, here are some more related articles that I encourage you to read below to solve more of your gardening problems:
What are the Orange River Hearts series?
Why are my banana leaves turning yellow?